EVGAFF 7KW European Standard EV Charger (wall-mounted set Socket)

EVGAFF 7kW Home AC Charger provides to the market a full range of AC charging meeting global standards. 100% in-house design and production enable us to meet the market’s requirement of short lead-time delivery, professional service and fast reaction to design upgrades. We carry out tough mechanical tests to all the designs to ensure the AC charger has a long lifetime.     Installation instructions The place where charging facilities are used should ensure that there is sufficient power connected to the load capacity, and that the voltage drop and power quality meet the standards. The site selection and installation construction of charging facilities should comply with standards, and professional personnel and qualified construction units should be selected. The installation environment of charging facilities should match the protection level of the charging facility casing, avoiding explosive environments such as moisture, water accumulation, dust, and heat sources as well as corrosive environments。 The cables, terminals, and other components selected for installation should meet the current requirements. Before and after installation, it should be ensured that all wiring related to the charging equipment is tight and well-insulated, otherwise, there is a risk of fire and electric shock. Before powering on the equipment, please ensure that it is grounded properly to avoid electric shock accidents； If any damage is found to the pile body, please immediately stop installation and use Non-professional personnel are prohibited from dismantling the charging station Prohibit children from touching the charging station. Specifications  AC input specifications Parameter Specification Input AC power connection 1 phase Input voltage (1 phase) 220 to 240 VAC Input current 32 A Earth fault protection 30 mA AC, 6 mA DC AC output specifications Parameter Specification AC output voltage range 220 to 240 VAC AC output current 10A, 16A and 32A Connection standard Type-2 cable IEC 62196 Maximum output power 7.4 kW Network interface Parameter Specification Connectivity (optional) GSM, 4G, LTE WiFi (WAN) IEEE 802.11 b/g/n Bluetooth BLE 5.0